HBL3325C
 |
Nylon casing, back wired. |
| Hubbell Wiring Device-Kellems Product Specifications | |
|---|---|
| Device Type | Flanged Inlet |
| Device Style | Twist-Lock |
| Amperage | 20A |
| Volts | 125/250V |
| Poles and Wires | 3 Pole, 3 Wire Non Grounding |
| Design Type for Flanged Inlets and Receptacles | Nylon |
| Configuration Type | Non NEMA |
| Color |  |
| Terminal Retainer Material | Clear polycarbonate |
| Blade Material | Brass |
| Terminal Clamp Material | .08" (2) steel-nickel plated |
| Terminal Screw Material | #10-32 Brass (white finish on neutral screw when used) Multi-drive |
| Body Holding Screw Material | Steel, zinc plated Multi-drive |
| Body Contact Carrier Material | Natural White Nylon |
| Flanged Casing Material | Natural White Nylon |
| Mounting Screw Material | Nickel-plated Brass Round head screws |
| Ratings | Molded into face |
| Catalog No. | Permanently ink marked on casing |
| Dielectric Voltage Withstand | 2,000V minimum. |
| Current Interrupting | Certified for current interrupting at full rated current. |
| Temperature Rise | Max 30 C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of .75. |
| Terminal Accommodation | 20A #12 AWG |
| Terminal Identification | Terminals identified in accordance with UL 498 (X, Y, Z, White, Green) |
| Flammability | HB or better per UL 94 or CSA 22.2 No. 0.6 |
| Operating Temperatures | Maximum Continuous 75 C Minimum -40 C (w/o impact) |
| Listings | UL |
 |
